Moduly Nodz 10 kWh Plug‑and‑Play Energy Storage System

The Moduly 10 kWh system is a powerful, scalable energy solution for large homes, commercial applications, or extended off‑grid living.

Features:

• Integrated AI – Automated optimization of your energy use.
• Longer Peak‑Hour Cycle – 1.8 kW for up to 4 hours (≈ 7.2 kWh usable).
• Peak‑Shaving Power – Reduce peak demand fees by up to 20%.
• Solar‑Ready – Plug directly into existing PV systems without extra inverters.
• DIY Installation – Set up in under 20 minutes, no electrician required.
• Flexible Financing – Subscription plans from $156/mo with zero upfront cost.

Ideal for:

• Large homes and commercial properties with significant energy demands.
• Solar customers seeking deeper self‑consumption control.
• Extended outages or fully off‑grid living scenarios.
• Businesses aiming to cut operational costs and carbon footprint.

Power through any challenge with Moduly’s most reliable and high‑capacity system.

Performance Specs

• Max Output Current 15 A @12 0VAC (60 Hz)
• On-Grid Power 2 kW
• Backup Power 2 kW/ 4k W peak
• Energy Capacity 2.5 kWh up to 12.5 kWh

Off-grid inverter / UPS

• Rated power 2000 W
• Peak power 4000 W
• Input voltage range 20 - 31 V
• Output voltage 110 VAC ± 5%
• Output frequency 60 Hz ± 0.5 Hz
• Output waveform Pure Sine Wave
• Operating temperature -14 °F to 122 oF (-10 °C to 50 °C)
  

Protection function

• Low voltage, Over voltage, Overload,
• Over temperature, Short circuit, Input
  reverse polarity (burn fuse)
• Grid-tie inverter
• Rated power 1800 W
• Input voltage range 20 - 45 VDC
  Output voltage 120 VAC
• Output frequency 50 Hz/60 Hz (Auto control)
• Output current 15 A at 120 VAC
• Power factor >97.5%
• THD <5%
• Phase shift <2%
• Output waveform Pure Sine Wave
• Operating temperature -13 °F to 158 oF (-25 °C to 70 °C)
  

Protection function

• Islanding; Short-circuit; Low
  Voltage; Over Voltage; Over
  Temperature Protection

Mechanical Specs 

2.5 kWh Nødz

• Size: 69 cm x 20 cm x 125.3 cm (27.2 in x 7.9 in x 49.4 in)
• Weight: 347.4 lbs (157.7 kg)
  

Moduly Controller

• Size: 69 cm x 20 cm x 27.5 cm (27.2 in x 7.9 in x 10.8 in)
• Weight: 56.2 lbs (25.5 kg)

Moduly Battery

• Size: 69 cm x 20 cm x 21.8 cm (27.2 in x 7.9 in x 8.6 in)
• Weight: 70.7 lbs (32.1 kg)

Legs

• Size: 42.3 cm x 18 cm x 10.6 cm (16.7 in x 7.1 in x 4.2 in)
• Weight: 8.4 lbs (3.8 kg)

Battery specifications (per module)

• Battery chemistry LiFePO4
• Nominal voltage 25.6 V
• Voltage range 17.6 V - 29.2 V
• Nominal capacity 96 Ah/2.46 kWh
• Charging current Standard 0.2 C(19 A)/Rapid 0.5 C(48 A)
• Max continuous
  discharge current 100 A
• Operating temperature 32 °F to 113 oF (0 °C to 45 °C)
  

BMS protection function

• Over-discharge, Overcharge, Short
  circuit, Temperature protection,
  Overcurrent protection
  

Battery charger

• Maximum output voltage 29.2 ± 0.2 VDC
• Nominal output power 800 W
• Input voltage 100 - 240 VAC 50 Hz/60 Hz
• Maximum input current 15 A (AC)
  Operating temperature 14 °F to 122 oF (-10 °C to 50 °C)
• Protection function Over voltage, Over temperature, Short circuit, Input reverse polarity
  

Safety and compliance

• Controller Certifications UL 2054, UL 62368-1, CAN/CSA C22.2 No. 62368-1:19, IEEE 1547
• Battery Certifications ANSI/CAN/UL 1973, FCC Environmental (for battery) California Prop 65, Transportation UN 38.3
• Protection Anti-islanding